How High to Mow a Lawn in Ontario

Most Ontario lawns do best cut between 1.5 and 3.5 inches, and the right setting depends on the grass underneath. Tall fescue wants the most height, while perennial ryegrass and rough bluegrass want the least. If you don’t know what you have, 3 inches fits inside the range for Kentucky bluegrass, fine fescues and tall fescue, and it errs toward too tall instead of too short.

The mowing height for Ontario lawns

Height by species

Five cool-season species do nearly all the work in Ontario lawns, and their ideal heights are not close together. A reader who cuts tall fescue at ryegrass height will thin it out within a season or two. Here are the figures, which sit within the ranges published by extension services such as Purdue Extension and University of Illinois Extension.

Grass Mowing height
Tall Fescue 3 to 3.5 inches
Kentucky Bluegrass 2 to 3 inches
Fine Fescues 2 to 3 inches
Perennial Ryegrass 1.5 to 2.5 inches
Rough Bluegrass 1.5 to 2.5 inches

Seed blends complicate things, because few lawns are one pure species. A mix of Kentucky bluegrass and perennial ryegrass, a common pairing, overlaps at 2 to 2.5 inches, so that is the range to aim for. When a lawn is mostly tall fescue with a few stray patches of something finer, mow for the fescue. The dominant grass sets the height.

Why only cool-season grasses

These five are cool-season species, and that is the only group that holds up here. Warm-season grasses grow best in sustained heat and go dormant and brown when it turns cold. Ontario winters are harsher than they tolerate, and the stretch between the average last spring frost and the average first fall frost leaves them little time to recover. Cool-season grasses do the reverse. They grow hardest in spring and fall and slow down in midsummer, which is why the mowing calendar below looks the way it does.

The same logic plays out across the border. Our guide on How High to Mow a Lawn in Maine covers a similar cool-season setup, while How High to Mow a Lawn in Hawaii deals with a different set of grasses and a different set of heights. For the general technique that applies everywhere, see Mowing a Lawn.

Raising the deck when the heat comes

Summer is when most lawns get cut too short. The Toronto Pearson station, in Environment and Climate Change Canada’s 1981-2010 normals, records about 226 mm (8.9 inches) of rain across June, July and August, out of 785 mm (30.9 inches) for the year. June is the driest of the three at 71 mm (2.81 inches), followed by July at 76 mm (2.98 inches) and August at 78 mm (3.07 inches). That is a fairly even supply, and it can fool a mower into thinking the lawn is fine at any height.

Rainfall never tells the whole story, though. Soil changes what an inch of rain does. On sand it drains through within the day, so a wet summer can still leave a lawn thirsty every second day. On clay it holds for a week or more. Heat matters too. Days at or above 90°F (32°C) drive evaporation, and rain that falls as a single thunderstorm mostly runs off instead of soaking in. A lawn on a slope or in a hot, built-up neighborhood will behave differently from the station’s averages. These are normals for one reference station, not a forecast for your yard, so a rain gauge on your own plot settles it.

The practical move is simple: when hot, dry weather sets in, move the deck to the top of your species’ range. That means 3 inches for Kentucky bluegrass and fine fescues, 2.5 inches for perennial ryegrass and rough bluegrass, and 3.5 inches for tall fescue. Taller blades shade the soil and the crown of the plant, which keeps the ground cooler and slows moisture loss. A lawn cut at the bottom of its range in July has less leaf to feed itself and less shade for its roots, and it is usually the first to turn straw-colored.

Cool-season grass will often go semi-dormant in a hot dry spell, and that is normal. Mowing less often during those weeks, at the higher setting, is better than trying to keep it tidy with a short cut.

The one-third rule, and why it is not arbitrary

Never remove more than one-third of the blade height in a single mowing. Every lawn guide repeats it, but the reason matters. Leaves are the plant’s food factory, and a heavy cut removes a large share of that factory at once while the roots still demand energy. The grass answers by pulling resources toward regrowth, and the stress shows up as a thin, weak turf that weeds then colonize.

The rule also tells you when to mow, which is more useful than a fixed weekly schedule. Work it backward from your target height:

  • Perennial ryegrass kept at 2 inches should be cut when it reaches 3 inches.
  • Kentucky bluegrass kept at 3 inches should be cut at 4.5 inches.
  • Tall fescue kept at 3.5 inches should be cut at 5.25 inches.

Notice that taller lawns have more room to grow between cuts. That is one reason a higher setting is easier to maintain, because a missed week does less damage.

Life gets in the way, of course. After a rainy fortnight or a vacation, the grass may already be well past the limit. Don’t drop it to the target in one pass. Raise the deck, take off a third, and then lower it a notch every few days until you are back at your normal height. It takes two or three extra mowings, and it saves the lawn from a shock it would otherwise take weeks to recover from.

The first and last cut of the year

At Toronto Pearson, the average last spring frost falls on April 30, and the average first fall frost on October 16 (Environment and Climate Change Canada, 1981-2010 normals). Those are mean dates, so in about one year out of two the frost arrives later than the date shown. Treat each as the middle of a window, never as a safe date. And since they come from one station, they won’t match a lawn in northern or upland Ontario, where the season can run weeks behind. For local guidance, Ontario’s agriculture and food resources are a good starting point.

The first cut is set by growth, not the calendar. Once the grass has grown enough that taking off a third still leaves you at your target height, it is time. Start at the upper end of your species’ range, since spring growth is fast and the roots are still catching up. This is also the moment to sharpen the blade. A dull blade tears the grass instead of cutting it and leaves frayed, brownish tips.

The last cut works the same way in reverse. Keep mowing as long as the grass grows past your target, which in a mild fall can run past the average first-frost date. When growth slows and then stops, you are done. For the final mowing you can drop toward the lower part of your species’ range, but never below it, because scalping going into winter leaves the crown exposed. Even then, the one-third rule still applies. A lawn that went into November long and unmowed deserves two stepped cuts, not one big chop.

Common questions

What is the best mowing height for a typical Ontario lawn?

It depends on the species. Tall fescue goes at 3 to 3.5 inches, Kentucky bluegrass and fine fescues at 2 to 3 inches, and perennial ryegrass and rough bluegrass at 1.5 to 2.5 inches. If you are unsure what is growing, 3 inches suits the first three.

Should I cut the lawn shorter before winter?

Only slightly, and only within your species’ range. The final cut can sit toward the lower end of the recommended height, but going below it exposes the crown. Keep to the one-third rule even then, using two stepped cuts if the grass is long.

If summer rain is steady, do I still need to raise the deck?

Yes. About 226 mm (8.9 inches) falls over June to August at the Toronto Pearson station, but sandy soil drains it quickly, and heat and thunderstorm runoff take their share. A taller cut shades the soil in any case, so it helps whatever the rain does.

Do the Toronto frost and rainfall figures apply to my lawn?

They are a starting point only. They come from one station and cover 1981-2010, so they are not directly comparable to the 1991-2020 US figures. Northern and upland districts run weeks behind, and your own slope, soil and rain gauge matter more.

Related guides