Set the mower between 2 and 3.5 inches, and let the grass species pick the exact number. Tall fescue wants 3 to 3.5 inches. Kentucky bluegrass and fine fescues do best at 2 to 3 inches. Perennial ryegrass and rough bluegrass sit lower, at 1.5 to 2.5 inches. If the lawn is a mix and you can’t tell what is growing, 3 inches fits tall fescue, bluegrass and fine fescue alike. It is a safe place to start.
The mowing height for Massachusetts lawns
What height suits each grass?
Grass blades are the plant’s solar panels. A taller blade catches more light, and the plant answers by growing deeper roots and shading the soil around it. Shaded soil stays cooler, holds moisture longer, and gives weed seeds less light to germinate. Cut too low and the lawn spends its energy regrowing leaf instead of building roots. The species differ in how much leaf they need, which is why the numbers are not the same for every lawn.
| Grass | Mowing height |
|---|---|
| Tall Fescue | 3 to 3.5 inches |
| Kentucky Bluegrass | 2 to 3 inches |
| Fine Fescues | 2 to 3 inches |
| Perennial Ryegrass | 1.5 to 2.5 inches |
| Rough Bluegrass | 1.5 to 2.5 inches |
These ranges are far enough apart to matter. Tall fescue mowed at 1.5 inches is being scalped, and it will thin out within a season or two. Perennial ryegrass left at 3.5 inches tends to flop over and mat. Check the seed bag if you seeded the lawn yourself. If you inherited it, a handful of turf brought to the county extension office, or a question to UMass Extension, will settle what you have.
Mower dials are often off by a notch or more. Park the mower on a driveway or other flat, hard surface and measure from the ground to the underside of the blade with a ruler. Mark the setting that gives the height you want, and you are done for the year.
Why do cool-season grasses suit Massachusetts?
Fine fescues, Kentucky bluegrass, perennial ryegrass, rough bluegrass and tall fescue are all cool-season species. They grow hardest in spring and fall, slow down in summer heat, and come back after a long cold winter. A warm-season grass will not hold here. Those species grow best in sustained heat, stop growing and turn brown once the soil cools, and green up late in spring. The first fall frost can arrive in early November at the reference station in Boston, and it comes earlier inland and in the Berkshires. That leaves warm-season turf brown for months and exposed to winter injury.
Raising the deck when the heat comes
Summer is when a Massachusetts lawn is under the most stress, and a taller cut is the cheapest help available. When July arrives, move the deck to the top of your species range: 3.5 inches for tall fescue, 3 inches for Kentucky bluegrass and fine fescues, 2.5 inches for perennial ryegrass and rough bluegrass. The extra leaf shades the crown of the plant and the soil beneath it, which slows evaporation and keeps the root zone a little cooler.
Rain helps, but not as much as the totals suggest. At the Boston reference station, the 1991-2020 NOAA NCEI normals show about 10.4 inches of rain across June, July and August, out of 43.6 inches for the whole year. June averages 3.89 inches, July 3.27 and August 3.23, which makes August the driest of the three. But those are normals for one waterfront station, not a forecast, and a slope, a city lot or a rain shadow can change them.
Soil decides what happens to that rain. On sandy ground a good soaking drains through within the day, so a lawn on sand can need water every second day even in a wet summer. Clay holds an inch of rain for about a week. Days at or above 90°F pull water out of the turf and the soil quickly, and one summer thunderstorm mostly runs off instead of soaking in. A rain gauge on your own plot tells you what actually landed.
A simple test beats a calendar. Walk across the lawn and look back. If your footprints stay pressed into the grass instead of springing back, the blades are short on water. Water deeply when that happens, and leave the clippings on the lawn, since they return moisture and nutrients to the soil. Keep the blade sharp, too. A dull blade tears the tips and leaves a brown haze that looks like drought.
The one-third rule, and why it is not arbitrary
Never remove more than one-third of the blade height in a single mowing. Take off more than a third and you strip so much leaf at once that photosynthesis drops sharply. The roots, deprived of sugars, pull back. Mow like that repeatedly and the lawn gets shallow-rooted and thin, which is exactly the condition that makes summer heat damaging.
The arithmetic is easy to turn into a schedule. For a lawn kept at 3 inches, mow when it reaches 4.5 inches, cutting off 1.5 inches. Tall fescue at 3.5 inches should be cut when it reaches about 5.25 inches. Perennial ryegrass held at 2 inches should be mowed at 3 inches. Mow by the grass height and not by the day of the week.
That is why spring takes more attention than July. Cool-season turf grows fastest in May and early June, and you may need to mow twice a week to stay within the rule. By midsummer, growth slows, and every ten days can be enough. In a dry August, even less.
Got behind because of rain or a long trip? Do not cut the lawn straight down to the target height. Raise the deck to remove about a third, then wait a few days for the grass to recover and cut again at a lower setting. Heavy clippings from an overgrown lawn can smother the grass, so rake or bag them if they pile up in clumps. The basics of mower setup, blade care and pattern are covered in Mowing a Lawn.
The first and last cut of the year
At Boston’s Logan Airport, the last spring frost at 32°F typically falls between April 1 and April 8, and the first fall frost between November 3 and November 14. Logan is a waterfront urban station and the mildest spot in the state. Inland suburbs and the Berkshires frost later in spring and earlier in fall, so your town may sit behind those dates.
For the first cut, let the grass tell you. Wait until the lawn is actively growing and the soil has firmed up enough that you don’t leave ruts or footprints in it. Mowing soggy ground compacts it. When the grass reaches roughly a third above your target height, mow at your normal setting. For a 3-inch lawn, that means the first pass at around 4.5 inches. Don’t scalp the lawn to look tidy in April, because a deep first cut can set it back just as it is trying to grow.
The last cut works the same way in reverse. Keep mowing for as long as the grass is growing, which in a mild fall can run past the first frost. Cool autumn weather brings a second growth flush, and the lawn will need cutting through October in most years. For the last cut or two you can lower the deck to the bottom of your species range, but never below it. Long grass going under snow mats down and stays wet, while cutting below the range leaves the crown exposed to winter cold.
Common questions
What is the best mowing height for a Massachusetts lawn?
It depends on the grass. Tall fescue does best at 3 to 3.5 inches. Kentucky bluegrass and fine fescues do best at 2 to 3 inches. Perennial ryegrass and rough bluegrass do best at 1.5 to 2.5 inches. For a mixed lawn of unknown makeup, 3 inches works for tall fescue, bluegrass and fine fescue.
What if my lawn is a mix of several grasses?
Pick the height that suits most of the turf. Kentucky bluegrass, fine fescues, perennial ryegrass and rough bluegrass all overlap between 2 and 2.5 inches, so that range suits a mix of those four. If tall fescue makes up much of the lawn, go to 3 inches or higher, since it suffers most when cut short.
Should I mow shorter in spring to green up faster?
No. The grass greens up with warmth and growth, and a short cut removes the leaf it needs to do that. Mow at your normal height once the lawn is growing and the soil is firm.
How often should I mow in summer?
As often as the one-third rule requires, which is usually less often than in spring. When heat slows growth, every ten days can be enough. Keep the deck at the top of your species range, and check the lawn height before you start the mower.