How High to Mow a Lawn in British Columbia

Mow each lawn at the height its grass prefers. Tall fescue does best at 3 to 3.5 inches, Kentucky bluegrass at 2 to 3 inches, and perennial ryegrass at 1.5 to 2.5 inches. Zoysiagrass and bermudagrass sit lower, at 1 to 2 inches. These ranges are far apart, so a mower set for one species can ruin another. Check what is growing in your yard before you touch the deck lever.

The mowing height for British Columbia lawns

Blade height controls how much shade reaches the soil and how deep the roots go. A taller blade shades the ground, which slows evaporation and keeps weed seeds from sprouting. It also gives the plant more leaf surface to feed its roots. Cut too low and the grass has to rebuild leaf before it can rebuild anything else.

Rainfall makes this matter in B.C. summers. At the Vancouver airport station, Environment and Climate Change Canada’s 1981-2010 normals show 1189 mm (46.8 inches) of rain over the year. Only 127 mm (5.0 inches) falls across June, July and August. July is the driest month at 36 mm (1.4 inches), with June at 54 mm (2.12 inches) and August at 37 mm (1.45 inches). That is one station, and a rain shadow, a slope or a city lot can change the picture. A rain gauge on your own plot settles it.

What height suits each grass?

Grass Type Mowing height
Tall fescue Cool-season 3 to 3.5 inches
Kentucky bluegrass Cool-season 2 to 3 inches
Perennial ryegrass Cool-season 1.5 to 2.5 inches
Zoysiagrass Warm-season 1 to 2 inches
Bermudagrass Warm-season 1 to 2 inches

These ranges come from extension services including Clemson, NC State, Illinois, Missouri, Georgia and K-State. No species wins everywhere, and each family has a cost. A cool-season lawn tends to suffer in July. A warm-season lawn is brown from October to April. Pick the trade-off you can live with, then mow to the matching height.

If you are not sure what you have, look at the blades. Tall fescue is coarse and wide. A local garden center or the province’s agriculture and seafood resources can point you to someone who can identify a sample.

Raising the deck when the heat comes

July brings the least rain of the year, and the cool-season species feel it first. Move the deck to the top of the range for your grass: 3.5 inches for tall fescue, 3 inches for Kentucky bluegrass, 2.5 inches for perennial ryegrass. That extra leaf shades the crown and the soil, and shaded soil stays cooler and holds water longer.

Warm-season grasses handle summer heat well, since that is when they grow fastest. Zoysiagrass and bermudagrass still need to stay within 1 to 2 inches. Dropping below 1 inch to get a putting-green look leaves little leaf to recover from a dry spell.

Raising the deck does not replace watering, and the right schedule depends on your soil. The same rainfall behaves differently on sand and on clay. A sandy surface lets water through within the day, so a lawn on sand can need water every second day even in a decent summer. Clay can hold a single rain for a week. Push a screwdriver into the ground: if it slides in easily a few inches down, the root zone still has moisture.

The way rain arrives also counts. A summer thunderstorm that drops its water in half an hour mostly runs off, especially on a slope or compacted soil. Several days at or above 90°F speed up evaporation on top of that. Normals describe what a region can usually expect, and a dry July is typical here, so plan for one. A cheap rain gauge on the lawn will tell you whether last week gave the grass a real soaking or only wet the surface.

When growth slows in a drought, mow less often rather than lower. Grass that has gone straw-colored and dormant does not need cutting until it greens up again. Leaving the clippings on the lawn returns a little moisture and nitrogen, provided they are short enough to fall between the blades. If you want a refresher on the basics, see Mowing a Lawn.

The one-third rule, and why it is not arbitrary

Mow often enough that you are taking off only the top of the blade. Leaves make the sugars that feed the roots. Strip too much at once and the plant diverts energy to regrow leaf, while root growth slows. A lawn scalped repeatedly ends up shallow-rooted, thin and open to weeds.

The rule turns into a simple mowing schedule. Mow by the height of the grass, and the calendar will take care of itself.

Growth speed changes with the season, which is why a fixed Saturday routine fails. A mild, wet spring can push grass up several inches in a week. A dry July might give you two weeks with almost nothing to cut. A neighbor on the same schedule year-round will scalp in May and mow bare dust in July.

If the grass got ahead of you during a rainy stretch, do not drop it to the ideal height in one pass. Cut the top of the blade, wait a few days, and cut again. The second pass brings it down to the target without shocking the lawn. Check that the mower blade is sharp, too. A dull blade tears the grass tips and leaves a gray-brown cast across the lawn.

The rule is the same in every climate, even if the timing differs. For comparison with colder or more humid conditions, see How High to Mow a Lawn in Manitoba and How High to Mow a Lawn in New York.

The first and last cut of the year

The Vancouver airport station averages its last spring frost on March 18, based on Environment and Climate Change Canada’s 1981-2010 normals. That is a mean, so in one year out of two the last frost falls later. Treat it as the middle of a window. It is also one station near sea level. Northern and upland districts of the province run weeks behind it, and the Canadian normals cover a different period from the 1991-2020 figures used for US sites, so the two are not directly comparable.

The grass tells you more than the date does. Make the first cut once the lawn is growing and the soil is firm enough to walk on without leaving ruts. Start at the top of your species range, even if you plan to settle lower later. Early mowing on soft ground compacts the surface, and a cool-season lawn that has just woken up has little reserve to spare.

On the other end, the mean first fall frost at the same station is November 10. In one year out of two it arrives earlier. Cool-season grasses can keep growing in mild fall weather, so keep mowing at your usual height as long as the blades are growing. Lower the deck toward the bottom of the species range for the final mowing, but stay inside it. Very long grass going into winter can mat under leaves or snow and invite disease.

Warm-season lawns follow a different calendar. Zoysiagrass and bermudagrass are brown from October to April, so the last cut comes when growth stops and the first cut comes once green returns. Keep leaves raked or mulched in autumn so they do not smother the turf. Check the mower, sharpen the blade and drain the fuel before storing it for winter.

Common questions

How high should I mow tall fescue?

Tall fescue does best at 3 to 3.5 inches. Use the top of that range in July, when rainfall is at its lowest. At 3 to 3.5 inches, mow before the grass gets much taller.

Should I mow brown, dormant grass in summer?

Not until it greens up again. A dormant lawn is not growing, so there is nothing to trim, and cutting it adds stress. When rain or watering revives it, resume mowing at the species height.

Is a shorter cut better for a thicker lawn?

No. Cutting below the species range thins the turf, exposes soil to heat and lets weeds in. Kentucky bluegrass kept at 2 to 3 inches and tall fescue at 3 to 3.5 inches are denser and more drought-tolerant than the same grass cut short.

How do I know what grass I have?

Look at blade width, texture and growth habit, and take a clipped handful to a local garden center if you are unsure. The province’s agriculture and seafood pages are a place to start looking for local contacts. Identify it first, since the heights differ widely between species.

Related guides