Finishing a Basement in Kansas: Permits, Ceiling Height, Egress and Waterproofing
Kansas has no state residential code, so basement ceiling height, egress window size and permit rules come from your city or county building department.
Home & garden, state by state
Kansas has no state residential code, so basement ceiling height, egress window size and permit rules come from your city or county building department.
Huntsville’s design snow load, wind speed and ice barrier rules explained, with the code that applies in Alabama and what each figure means for a roof permit.
Prune American hornbeam in early summer, once the first flush of spring growth has hardened off and stopped stretching.
Foundation and basement problems, from cracks to musty smells, are almost always caused by water, and every fix starts with checking drainage outside before anything indoors, plus a radon test.
NKBA guidelines set each work triangle leg at 4 to 9 feet and the total at 13 to 26 feet, a design recommendation rather than a code requirement.
Those lumpy brown growths on eastern red cedar that swell into slimy orange tentacles after a spring rain are cedar-apple rust galls, caused by a fungus…
NKBA sets the standard 18-inch cabinet gap, but a cooktop below changes the rule entirely under building code clearance requirements.
Blackout curtains fail at the perimeter, not the fabric, so panel overlap, rod height and return sides matter more than fabric weight.
IES RP-1 recommends placing under-cabinet lighting at the front edge of the cabinet so it lights the counter instead of glaring off a glossy backsplash.
Prune holly in late winter, while the plant is still dormant and before new growth starts.