How High to Mow a Lawn in Newfoundland and Labrador

Set the mower between 2 and 3 inches for most lawns in Newfoundland and Labrador. If the grass is tall fescue, go to 3 to 3.5 inches. Perennial ryegrass and rough bluegrass tolerate a lower cut, 1.5 to 2.5 inches, but they pay for it in a hot spell or a dry stretch. Mow high, never remove more than a third of the blade at once, and move the deck as the season turns.

The mowing height for Newfoundland and Labrador lawns

A grass blade is the plant’s solar panel, and the root system is sized to match it. Cut the panel back hard and the roots shrink to keep pace. Leave more leaf and the roots dig deeper, which matters in a province where summers can be soggy one month and thin on rain the next. That is the logic behind mowing taller than many homeowners do, since a short cut looks tidy for only about three days.

Height by species

The cool-season grasses suited to this climate do not share one number. Mowing one at another’s height can cost you the lawn, so check which one you actually have. Extension guidance from land-grant universities puts them here:

Grass Mowing height
Tall Fescue 3 to 3.5 inches
Fine Fescues 2 to 3 inches
Kentucky Bluegrass 2 to 3 inches
Rough Bluegrass 1.5 to 2.5 inches
Perennial Ryegrass 1.5 to 2.5 inches

Most home lawns here are a blend, usually fine fescue, Kentucky bluegrass and ryegrass together. With a blend, pick a height that falls inside every range in the mix. Somewhere around 2.5 to 3 inches satisfies all of them. If the lawn is nearly pure tall fescue, it needs the extra height, and 2 inches will thin it out.

Why the grass has to be a cool-season one

Warm-season grasses grow fast only in sustained heat. They stop and turn brown when temperatures fall, and they need a long warm stretch to store the reserves that carry them through winter. At St. John’s, the average last spring frost is May 30 and the average first fall frost is October 17, which leaves about 20 weeks between them. That is not enough warm time for a warm-season turf to build up, and a cold, wet winter finishes the job. Cool-season species do their growing in spring and fall, which is when this province hands you the right weather.

Raising the deck when the heat comes

A hot, bright week still stresses cool-season turf, and heat is the one thing these species do worst. In a warm spell, move the deck to the top of your grass’s range: 3 inches for fine fescue or bluegrass, 2.5 for ryegrass, 3.5 for tall fescue. Longer blades shade the soil, hold surface temperature down and slow evaporation.

Rain is the other half of the picture. Environment and Climate Change Canada’s 1981-2010 normals for the St. John’s A station show about 290 mm (11.4 inches) across June, July and August, out of 1534 mm (60.4 inches) for the full year. The driest summer month is July at 92 mm (3.61 inches), with June at 98 mm (3.84 inches) and August at 100 mm (3.94 inches). Two cautions, though. These are normals for one station over 1981-2010, not a forecast, and they are not directly comparable to the 1991-2020 normals used for US states. A slope, a coastal exposure or a town in the interior will not match them.

Rainfall also never works alone. The same inch of rain soaks through a sandy lawn within the day, while a clay one can hold it for a week. A heavy downpour mostly runs off a compacted or sloping lawn instead of soaking in. A cheap rain gauge on your own plot settles the question better than any regional average. If the gauge shows less than about an inch in a week and the grass is going gray-green, water deeply, and keep the deck high while you do.

To see how this logic plays out in a much hotter place, compare How High to Mow a Lawn in Alabama. For another maritime take, see How High to Mow a Lawn in Washington.

The one-third rule, and why it is not arbitrary

Never cut more than one third of the blade height in a single mowing. It follows from how the plant works. Photosynthesis happens in the leaf. Remove half the leaf in one pass and the grass loses much of its food supply overnight, so it pulls resources from the roots to regrow the blade. Roots that stop growing for a week or two are exactly what you do not want heading into a dry spell.

The arithmetic dictates how often you mow. At a 3-inch cut, the grass should not get taller than 4.5 inches before you mow. At 2.5 inches, the ceiling is about 3.75. Tall fescue held at 3.5 inches can reach 5.25 inches before it needs cutting. With this much rain, June growth can outrun a weekly schedule, so mow when the grass reaches the ceiling, not when the calendar says Saturday.

Missed a few weeks? Do not drop the deck to the usual height in one go. Cut off about a third, wait three or four days, then cut again, stepping down until you are back in range. Sharp blades matter here too: a dull mower tears the leaf tips and leaves a pale, ragged cut that loses water faster. For the rest of the routine, Mowing a Lawn covers the job from start to finish.

Leave the clippings on the lawn when you stay within the third. Short clippings break down quickly and return nitrogen to the soil. Only very tall, wet growth leaves clumps worth raking.

The first and last cut of the year

The St. John’s averages of May 30 and October 17 are mean dates from the 1981-2010 normals. In about one year out of two, the frost arrives later than the average date, so treat each as the middle of a window, never a safe date. Northern and upland districts, and most of Labrador, run weeks behind the St. John’s station.

For the first cut, ignore the calendar and watch the grass. Start when the lawn has grown enough that you can trim it to your target height and still stay within the one-third limit, and when the ground is firm enough that the wheels do not leave ruts. Spring soil here stays wet for a long time, and mowing a saturated lawn compacts it and tears the turf. The first pass can come a little higher than the summer setting. Hold off on raking hard or fertilizing until the grass is clearly growing.

The last cut mirrors the first. Keep mowing as long as the grass is actually growing, which in many years runs past the October 17 average. For the final pass, drop to the low end of your species’ range, such as 2 inches for fine fescue or bluegrass, not below it. Very long grass going under snow tends to mat and invites snow mold, while a scalped lawn goes into winter with little to protect the crown. Clear fallen leaves too, since a wet layer smothers the turf.

For questions specific to your district, such as soil, local frost timing or recommended seed, the provincial agriculture office is the official place to start.

Common questions

What is the best mowing height for a typical Newfoundland and Labrador lawn?

For a mixed lawn of fine fescue, Kentucky bluegrass and ryegrass, 2.5 to 3 inches is the safe middle. Straight tall fescue wants 3 to 3.5 inches, and a pure ryegrass or rough bluegrass lawn can go as low as 1.5 to 2.5 inches.

Should I cut the grass shorter in a wet summer?

No. Rain makes the grass grow faster, so mow more often, but keep the height the same. A short cut in a wet, cloudy summer just weakens the lawn and invites disease.

When should I do the first mow in spring?

When the grass has grown past your target height by a margin that lets you remove no more than a third, and the soil is firm. The May 30 average last frost is only the middle of a window, so a late cold snap in June is not unusual.

Can I grow a warm-season grass here if I mow it correctly?

Mowing cannot fix the mismatch. Warm-season grasses need long, hot summers and go dormant in cool weather, and with only about 20 weeks between the average last and first frosts at St. John’s, they do not get the warmth to build winter reserves. Stick with the cool-season species in the table above.

Related guides